Will not fly. Didn't follow step with update. Now will not fly, HELP.

DJI FPV
1

DJI FLY. Didn’t follow steps for firmware update. Can’t fly. I’m not a technical person. Help.

1 Like
2

Some questions for you:

  • What changed between now and the last time all worked as expected?
  • What do you mean by “didn’t follow steps for firmware update”?
  • What seems to be preventing you from flying?
  • Do you see any error messages displayed at the top of DJI Fly, or after you tap that status message?
1 Like
3

I was very excited to fly. I turned on everything then on my fly app it said firmware update available so I taped it. I didn’t wait for firmware update to finish…I then powered everything back on then my goggles said id remote error. So I powered everything off and tried again. Motors started and refused to lift off.

1 Like
4

Why not? Did you complete the firmware update after powering everything back on again?

You can also update the firmware using DJI Assistant 2 (available here). That usually works when DJI Fly fails to update the firmware for whatever reason.

1 Like
5

Also on the goggle display, left of the satellite display is a red arrow.

1 Like
6

No did not complet firmware update.

1 Like
7

Also, on the goggle display to the left of satellite display is a red arrow.

1 Like
8

You should complete the firmware update before trying anything else.

1 Like
9

How do I do that?

10

Either follow the prompts in DJI Fly or use the DJI Assistant 2 application.

1 Like