I purchased a P3 Pro from Ebay which was listed as Parts/Repair and the seller stated the only issue was the gimbal would not sync. I got it for a good price and shortly after received communication from the seller that the drone had been through a crash and had already been sent for repairs at a local shop which could not fix it. (I know fml) Thats the origin story here’s the issues along with log files and video.
**Arrived with alarm constantly on, no arm lights and a red light on gimbal. At the time it would not sync up with RC. I attempted a firmware uprgrade which failed. No change
**Found a solution in a forum suggesting a roll back of the firmware and a small change to upgrade method. Attempted this and now RC syncs I have live camera feed and control of gimbal. However no IMU stats and when I attempt to calibrate it states “Disconnected.” Alarm still on but gimbal light is solid green now. Still no arm lights and noticed the battery is showing Zero volts in the app…hmmmm.
**Since then it has been a all out assault of firmware upgrade attempts, abandoning the bird in the garage for two hours(twice), a little bit of crying some black magic and a temper tantrum that saw my kids, dogs, wife and anyone within range being shot with orbees from my gel blaster. I have tried 3 different SD cards with the last one producing the most comprehensive logs however it has not left the gimbal light red. The sound was more like a correct firmware upgrade though.
.
VIDEO
Video Of Issue
LOGS
“Firmware Log”
[00012952]Delete history success.
[00013231]========== 2022.10.23 13:45:51. boot(15) ============
[00013306]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x80ce6865].
[00013384]Packet upgrade start…
[00013460]Packet checking…
[00013541]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013614]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013687]Done.
[00013764]Version checking[1]…
[00013868][03 06][00] v2.4.20.50 → v2.4.20.50
[00013989][03 05][00] v34.2.0.9 → v34.2.0.9
[00014075][04 00][00] v1.48.0.0 → v1.48.0.0
[00016733][11 00][00] v1.8.0.0 → v1.8.0.0
[00016889][11 01][00] v1.8.0.0 → v2.0.0.33, firmware v1.8.0.0 not support.
[00016962][11 01][00] v1.8.0.0 → v2.0.0.33
[00017070][12 00][00] v1.12.0.0 → v1.12.0.0
[00017200][12 01][00] v1.12.0.0 → v1.12.0.0
[00017312][12 02][00] v1.12.0.0 → v1.12.0.0
[00017471][12 03][00] v1.12.0.0 → v1.12.0.0
[00017651][15 00][00] v1.1.2.0 → v1.1.2.0
[00017777][17 00][00] v1.1.1.7 → v1.1.1.7
[00017934][17 01][00] v1.0.2.7 → v1.0.2.7
[00018034][19 00][00] v1.0.8.96 → v1.0.8.96
[00018106][01 00][00] v1.32.5432 → v1.32.5432
[00018180][01 01][00] v1.32.5432 → v1.32.5432
[00018271][08 00][00] v0.13.0.7 → v0.13.0.7
[00018392][09 00][00] v4.1.0.0 → v4.1.0.0
[00018463]Packet upgrade cancelled at version checking.
[00012842]========== 2022.10.23 16:51:27. boot(15) ============
[00012927]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x80ce6865].
[00013004]Packet upgrade start…
[00013089]Packet checking…
[00013167]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013248]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013326]Done.
[00013413]Version checking[1]…
[00013536][03 06][00] v2.4.20.50 → v2.4.20.50
[00013671][03 05][00] v34.2.0.9 → v34.2.0.9
[00013892][04 00][00] v1.48.0.0 → v1.48.0.0
[00014051][11 00][00] v1.8.0.0 → v1.8.0.0
[00014332][11 01][00] v1.8.0.0 → v2.0.0.33, firmware v1.8.0.0 not support.
[00014528][11 01][00] v1.8.0.0 → v2.0.0.33
[00014741][12 00][00] v1.12.0.0 → v1.12.0.0
[00014874][12 01][00] v1.12.0.0 → v1.12.0.0
[00015141][12 02][00] v1.12.0.0 → v1.12.0.0
[00015441][12 03][00] v1.12.0.0 → v1.12.0.0
[00015611][15 00][00] v1.1.2.0 → v1.1.2.0
[00015733][17 00][00] v1.1.1.7 → v1.1.1.7
[00015873][17 01][00] v1.0.2.7 → v1.0.2.7
[00015977][19 00][00] v1.0.8.96 → v1.0.8.96
[00016058][01 00][00] v1.32.5432 → v1.32.5432
[00016135][01 01][00] v1.32.5432 → v1.32.5432
[00016229][08 00][00] v0.13.0.7 → v0.13.0.7
[00016318][09 00][00] v4.1.0.0 → v4.1.0.0
[00016403]Packet upgrade cancelled at version checking.
[00013253]========== 2022.10.23 16:57:07. boot(15) ============
[00013336]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x80ce6865].
[00013411]Packet upgrade start…
[00013497]Packet checking…
[00013573]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013657]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013734]Done.
[00013811]Version checking[1]…
[00013941][03 06][00] v2.4.20.50 → v2.4.20.50
[00014061][03 05][00] v34.2.0.9 → v34.2.0.9
[00014149][04 00][00] v1.48.0.0 → v1.48.0.0
[00014307][11 00][00] v1.8.0.0 → v1.8.0.0
[00014481][11 01][00] v1.8.0.0 → v2.0.0.33, firmware v1.8.0.0 not support.
[00014553][11 01][00] v1.8.0.0 → v2.0.0.33
[00014710][12 00][00] v1.12.0.0 → v1.12.0.0
[00014847][12 01][00] v1.12.0.0 → v1.12.0.0
[00014992][12 02][00] v1.12.0.0 → v1.12.0.0
[00015131][12 03][00] v1.12.0.0 → v1.12.0.0
[00015322][15 00][00] v1.1.2.0 → v1.1.2.0
[00015447][17 00][00] v1.1.1.7 → v1.1.1.7
[00015633][17 01][00] v1.0.2.7 → v1.0.2.7
[00015730][19 00][00] v1.0.8.96 → v1.0.8.96
[00015812][01 00][00] v1.32.5432 → v1.32.5432
[00015888][01 01][00] v1.32.5432 → v1.32.5432
[00015975][08 00][00] v0.13.0.7 → v0.13.0.7
[00016071][09 00][00] v4.1.0.0 → v4.1.0.0
[00016154]Packet upgrade cancelled at version checking.
[00052563]========== 2023.06.23 22:26:06. boot(15) ============
[00052648]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x0915423c].
[00052870]Packet upgrade start…
[00052966]Packet checking…
[00053061]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00053149]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00053245]Done.
[00053331]Version checking[1]…
[00065933][03 06][00] device not detected.
[00078515][03 05][00] device not detected.
[00078638][04 00][00] v1.48.0.0 → v1.48.0.0
[00012576]========== remo-con disconnect. boot(15) ============
[00012659]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x14260d80].
[00012733]Packet upgrade start…
[00012815]Packet checking…
[00012890]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00012969]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013044]Done.
[00013125]Version checking[1]…
[00025700][03 06][00] device not detected.
[00038284][03 05][00] device not detected.
[00038368][04 00][00] v1.48.0.0 → v1.48.0.0
[00050943][11 00][00] device not detected.
[00063522][11 01][00] device not detected.
[00076094][12 00][00] device not detected.
[00088671][12 01][00] device not detected.
[00101243][12 02][00] device not detected.
[00113822][12 03][00] device not detected.
[00114014][15 00][00] v1.1.2.0 → v1.1.2.0
[00126596][17 00][00] device not detected.
[00139170][17 01][00] device not detected.
[00139281][19 00][00] v1.0.8.96 → v1.0.8.96
[00139356][01 00][00] v1.32.5432 → v1.32.5432
[00139437][01 01][00] v1.32.5432 → v1.32.5432
[00139524][08 00][00] v0.13.0.7 → v0.13.0.7
[00139619][09 00][00] v4.1.0.0 → v4.1.0.0
[00139692]Packet upgrade failed at version checking.
[00012583]========== remo-con disconnect. boot(15) ============
[00012663]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x14260d80].
[00012737]Packet upgrade start…
[00012819]Packet checking…
[00012892]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00012970]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013045]Done.
[00013123]Version checking[1]…
[00025702][03 06][00] device not detected.
[00038356][03 05][00] device not detected.
[00038447][04 00][00] v1.48.0.0 → v1.48.0.0
[00051020][11 00][00] device not detected.
[00063594][11 01][00] device not detected.
[00076173][12 00][00] device not detected.
[00088748][12 01][00] device not detected.
[00101320][12 02][00] device not detected.
[00113896][12 03][00] device not detected.
[00114085][15 00][00] v1.1.2.0 → v1.1.2.0
[00126672][17 00][00] device not detected.
[00012673]========== remo-con disconnect. boot(15) ============
[00012756]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x14260d80].
[00012828]Packet upgrade start…
[00012909]Packet checking…
[00012983]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013060]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013135]Done.
[00013212]Version checking[1]…
[00025785][03 06][00] device not detected.
[00038357][03 05][00] device not detected.
[00038447][04 00][00] v1.48.0.0 → v1.48.0.0
[00051023][11 00][00] device not detected.
[00063602][11 01][00] device not detected.
[00076174][12 00][00] device not detected.
[00088746][12 01][00] device not detected.
[00101325][12 02][00] device not detected.
[00113896][12 03][00] device not detected.
[00114089][15 00][00] v1.1.2.0 → v1.1.2.0
[00126670][17 00][00] device not detected.
[00139247][17 01][00] device not detected.
[00139355][19 00][00] v1.0.8.96 → v1.0.8.96
[00139430][01 00][00] v1.32.5432 → v1.32.5432
[00139508][01 01][00] v1.32.5432 → v1.32.5432
[00139602][08 00][00] v0.13.0.7 → v0.13.0.7
[00139701][09 00][00] v4.1.0.0 → v4.1.0.0
[00139778]Packet upgrade failed at version checking.
[00012596]========== remo-con disconnect. boot(15) ============
[00012673]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x14260d80].
[00012747]Packet upgrade start…
[00012832]Packet checking…
[00012905]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00012984]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013060]Done.
[00013250]Version checking[1]…
[00025833][03 06][00] device not detected.
[00038401][03 05][00] device not detected.
[00038497][04 00][00] v1.48.0.0 → v1.48.0.0
[00051069][11 00][00] device not detected.
[00063647][11 01][00] device not detected.
[00076219][12 00][00] device not detected.
[00088805][12 01][00] device not detected.
[00101380][12 02][00] device not detected.
[00113959][12 03][00] device not detected.
[00114131][15 00][00] v1.1.2.0 → v1.1.2.0
[00126705][17 00][00] device not detected.
[00139282][17 01][00] device not detected.
[00151868][19 00][00] device not detected.
[00151941][01 00][00] v1.32.5432 → v1.32.5432
[00152018][01 01][00] v1.32.5432 → v1.32.5432
[00152113][08 00][00] v0.13.0.7 → v0.13.0.7
[00152209][09 00][00] v0.0.0.0 → v4.1.0.0 need upgrade.
[00152289]Done.
[00154362]Waiting for user confirm…
[00164437]Timeout, start upgrade automatically.
[00164589]Firmware upgrading[1]…
[00164689][09 00] Firmware upgrade start…
[00216839][09 00] Firmware upgrade finished successfully.
[00216911]Done.
[00216988]Version checking[2]…
[00229570][03 06][00] device not detected.
[00242158][03 05][00] device not detected.
[00242273][04 00][00] v1.48.0.0 → v1.48.0.0
[00254846][11 00][00] device not detected.
[00267421][11 01][00] device not detected.
[00279998][12 00][00] device not detected.
[00292572][12 01][00] device not detected.
[00305150][12 02][00] device not detected.
[00317734][12 03][00] device not detected.
[00317894][15 00][00] v1.1.2.0 → v1.1.2.0
[00330476][17 00][00] device not detected.
[00343059][17 01][00] device not detected.
[00343145][19 00][00] v1.0.8.96 → v1.0.8.96
[00343225][01 00][00] v1.32.5432 → v1.32.5432
[00343302][01 01][00] v1.32.5432 → v1.32.5432
[00343390][08 00][00] v0.13.0.7 → v0.13.0.7
[00343486][09 00][05] v4.1.0.0 → v4.1.0.0
[00343563]Packet upgrade failed at version checking.
[00012587]========== remo-con disconnect. boot(15) ============
[00012668]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x14260d80].
[00012819]Packet upgrade start…
[00012895]Packet checking…
[00012971]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013046]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013125]Done.
[00013197]Version checking[1]…
[00025775][03 06][00] device not detected.
[00038349][03 05][00] device not detected.
[00038444][04 00][00] v1.48.0.0 → v1.48.0.0
[00051028][11 00][00] device not detected.
[00063605][11 01][00] device not detected.
[00076184][12 00][00] device not detected.
[00088771][12 01][00] device not detected.
[00101346][12 02][00] device not detected.
[00113917][12 03][00] device not detected.
[00114106][15 00][00] v1.1.2.0 → v1.1.2.0
[00126683][17 00][00] device not detected.
[00139255][17 01][00] device not detected.
[00139359][19 00][00] v1.0.8.96 → v1.0.8.96
[00139433][01 00][00] v1.32.5432 → v1.32.5432
[00139509][01 01][00] v1.32.5432 → v1.32.5432
[00139590][08 00][00] v0.13.0.7 → v0.13.0.7
[00139700][09 00][00] v4.1.0.0 → v4.1.0.0
[00139774]Packet upgrade failed at version checking.
[00012609]========== remo-con disconnect. boot(15) ============
[00012688]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x14260d80].
[00012765]Packet upgrade start…
[00012843]Packet checking…
[00012914]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00012989]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013063]Done.
[00013141]Version checking[1]…
[00012655]========== 2023.10.13 18:45:17. boot(15) ============
[00012736]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0x14260d80].
[00012824]Packet upgrade start…
[00012909]Packet checking…
[00012994]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013077]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013164]Done.
[00013248]Version checking[1]…
[00025837][03 06][00] device not detected.
[00038416][03 05][00] device not detected.
[00038530][04 00][00] v1.48.0.0 → v1.48.0.0
[00051239][11 00][00] device not detected.
[00063836][11 01][00] device not detected.
[00076415][12 00][00] device not detected.
[00089001][12 01][00] device not detected.
[00101582][12 02][00] device not detected.
[00114170][12 03][00] device not detected.
[00114371][15 00][00] v1.1.2.0 → v1.1.2.0
[00126966][17 00][00] device not detected.
[00139551][17 01][00] device not detected.
[00139668][19 00][00] v1.0.8.96 → v1.0.8.96
[00139758][01 00][00] v1.32.5432 → v1.32.5432
[00139841][01 01][00] v1.32.5432 → v1.32.5432
[00139946][08 00][00] v0.13.0.7 → v0.13.0.7
[00140071][09 00][00] v4.1.0.0 → v4.1.0.0
[00140150]Packet upgrade failed at version checking.
[00012599]========== remo-con disconnect. boot(15) ============
[00012673]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xcb972aed].
[00012752]Packet upgrade start…
[00012834]Packet checking…
[00012911]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00012984]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013059]Done.
[00013135]Version checking[1]…
[00025711][03 06][00] device not detected.
[00038291][03 05][00] device not detected.
[00038376][04 00][00] v1.48.0.0 → v1.48.0.0
[00050972][11 00][00] device not detected.
[00063551][11 01][00] device not detected.
[00076128][12 00][00] device not detected.
[00088712][12 01][00] device not detected.
[00101286][12 02][00] device not detected.
[00113863][12 03][00] device not detected.
[00114042][15 00][00] v1.1.2.0 → v1.1.2.0
[00126617][17 00][00] device not detected.
[00139194][17 01][00] device not detected.
[00139299][19 00][00] v1.0.8.96 → v1.0.8.96
[00139376][01 00][00] v1.32.5432 → v1.32.5432
[00139452][01 01][00] v1.32.5432 → v1.32.5432
[00139542][08 00][00] v0.13.0.7 → v0.13.0.7
[00139663][09 00][00] v4.1.0.0 → v4.1.0.0
[00139739]Packet upgrade failed at version checking.
[00012596]========== remo-con disconnect. boot(15) ============
[00012670]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xcb972aed].
[00012824]Packet upgrade start…
[00012898]Packet checking…
[00012977]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013055]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013133]Done.
[00013205]Version checking[1]…
[00025794][03 06][00] device not detected.
[00038368][03 05][00] device not detected.
[00038463][04 00][00] v1.48.0.0 → v1.48.0.0
[00051037][11 00][00] device not detected.
[00063608][11 01][00] device not detected.
[00076186][12 00][00] device not detected.
[00088762][12 01][00] device not detected.
[00101346][12 02][00] device not detected.
[00113921][12 03][00] device not detected.
[00114105][15 00][00] v1.1.2.0 → v1.1.2.0
[00126678][17 00][00] device not detected.
[00139255][17 01][00] device not detected.
[00139361][19 00][00] v1.0.8.96 → v1.0.8.96
[00139451][01 00][00] v1.32.5432 → v1.32.5432
[00139533][01 01][00] v1.32.5432 → v1.32.5432
[00139635][08 00][00] v0.13.0.7 → v0.13.0.7
[00139763][09 00][00] v4.1.0.0 → v4.1.0.0
[00139850]Packet upgrade failed at version checking.
[00012782]========== 2023.10.14 18:36:35. boot(15) ============
[00012866]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xcb972aed].
[00012953]Packet upgrade start…
[00013036]Packet checking…
[00013121]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013197]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013287]Done.
[00013364]Version checking[1]…
[00025954][03 06][00] device not detected.
[00038551][03 05][00] device not detected.
[00038664][04 00][00] v1.48.0.0 → v1.48.0.0
[00051244][11 00][00] device not detected.
[00063843][11 01][00] device not detected.
[00076425][12 00][00] device not detected.
[00089004][12 01][00] device not detected.
[00101586][12 02][00] device not detected.
[00114168][12 03][00] device not detected.
[00114381][15 00][00] v1.1.2.0 → v1.1.2.0
[00126973][17 00][00] device not detected.
[00139556][17 01][00] device not detected.
[00139682][19 00][00] v1.0.8.96 → v1.0.8.96
[00139894][01 00][00] v1.32.5432 → v1.32.5432
[00139980][01 01][00] v1.32.5432 → v1.32.5432
[00140086][08 00][00] v0.13.0.7 → v0.13.0.7
[00140209][09 00][00] v4.1.0.0 → v4.1.0.0
[00140299]Packet upgrade failed at version checking.
[00012664]========== 2023.10.14 18:41:37. boot(15) ============
[00012745]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xcb972aed].
[00012832]Packet upgrade start…
[00012916]Packet checking…
[00013003]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00013087]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013172]Done.
[00013256]Version checking[1]…
[00025845][03 06][00] device not detected.
[00038426][03 05][00] device not detected.
[00038532][04 00][00] v1.48.0.0 → v1.48.0.0
[00051113][11 00][00] device not detected.
[00012670]========== 2023.10.15 02:01:18. boot(15) ============
[00012751]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xcb972aed].
[00012882]Packet upgrade start…
[00013135]Packet upgrade failed at packet checking.
[00012592]========== remo-con disconnect. boot(15) ============
[00012664]Packet [C:\P3X_FW_V01.11.0020.bin] detected, card sn [0xfd5c219c].
[00012742]Packet upgrade start…
[00012819]Packet checking…
[00012902]Packet vlink 01.11.0020 ↔ 01.11.0020.
[00012975]Record vlink 01.11.0020 ↔ 01.11.0020 (flow = 0).
[00013050]Done.
[00013127]Version checking[1]…
[00025704][03 06][00] device not detected.
[00038289][03 05][00] device not detected.
[00038373][04 00][00] v1.48.0.0 → v1.48.0.0
[00050950][11 00][00] device not detected.
[00063525][11 01][00] device not detected.
[00076097][12 00][00] device not detected.
[00088674][12 01][00] device not detected.
[00101246][12 02][00] device not detected.
[00113835][12 03][00] device not detected.
[00114015][15 00][00] v1.1.2.0 → v1.1.2.0
[00126591][17 00][00] device not detected.
[00139164][17 01][00] device not detected.
[00151743][19 00][00] device not detected.
[00151930][01 00][00] v1.32.5432 → v1.32.5432
[00151998][01 01][00] v1.32.5432 → v1.32.5432
[00152089][08 00][00] v0.13.0.7 → v0.13.0.7
[00152170][09 00][00] v0.0.0.0 → v4.1.0.0 need upgrade.
[00152248]Done.
[00154319]Waiting for user confirm…
[00164396]Timeout, start upgrade automatically.
[00164543]Firmware upgrading[1]…
[00164631][09 00] Firmware upgrade start…
[00216798][09 00] Firmware upgrade finished successfully.
[00216880]Done.
[00216968]Version checking[2]…
[00229550][03 06][00] device not detected.
[00242138][03 05][00] device not detected.
[00242272][04 00][00] v1.48.0.0 → v1.48.0.0
[00254869][11 00][00] device not detected.
[00267452][11 01][00] device not detected.
[00280041][12 00][00] device not detected.
[00292622][12 01][00] device not detected.
[00305224][12 02][00] device not detected.
[00317802][12 03][00] device not detected.
[00317997][15 00][00] v1.1.2.0 → v1.1.2.0
[00330590][17 00][00] device not detected.
[00343173][17 01][00] device not detected.
[00343318][19 00][00] v1.0.8.96 → v1.0.8.96
[00343404][01 00][00] v1.32.5432 → v1.32.5432
[00343487][01 01][00] v1.32.5432 → v1.32.5432
[00343590][08 00][00] v0.13.0.7 → v0.13.0.7
[00343702][09 00][05] v4.1.0.0 → v4.1.0.0
[00343791]Packet upgrade failed at version checking.
“Result Log”:
Delete history success.
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2022.10.23 16:51:27 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2022.10.23 16:57:06 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2023.06.23 22:26:05 =====================
Packet: P3X_FW_V01.11.0020.bin
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading …
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
========== 2023.10.13 18:45:17 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2023.10.14 18:36:34 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
========== 2023.10.14 18:41:37 =====================
Packet: P3X_FW_V01.11.0020.bin
========== 2023.10.15 02:01:18 =====================
Packet: P3X_FW_V01.11.0020.bin
Result: Corrupted.
Firmware bin file is corrupted, download it again from the DJI offical website.
========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.11.0020.bin
Upgrading …
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.