Flight Reader not loading/launching

Flight Reader
1

I am running the latest version 1.7.54 and when I launch Reader I get the flash screen that says “Loading data… Applying configuration …” and then that’s it, nothing loads. Any ideas?

Running it on a Mac using Parallels desktop and Windows 11. Everything has worked fine before.

Chris

1 Like
2

Could you share your Error.log or email it to me?

C:\Users\[username]\Documents\FlightReader\Error.log

1 Like
3

I was able to get it working again after a number of restarts of Windows 11. It was kind of a gradual thing. It would sort of partially start then on the next restart, more functionality returned until it was fully working. I will share the error.log though since it might help determine what caused the problem in the first place.

Attached is the zipped Error.log file

Chris

Error.log.zip (25.3 KB)

1 Like
4

Flight Reader seems to be working fine now. Were you able to glean anything from the error log?

Chris

5

@chrislaf I have not seen any of these exceptions reported before, but thank you for sharing them. I can take a closer look at the code and see if any of these can be handled.

6

Hi Mike.

I see the same behavior as Chris but restart (Win10) does not bring anything. Start screen comes on saying applying configuration….. and immediately shuts down. Version 1.7.54.

Alan

7

Alan, I tried a restart which didn’t work. I then shut down, then restarted and I got a partial load. It was a much smaller window when it came back but I could see my logs but everything was mostly frozen except the Flight Reader exit. I shut down Windows again then restarted and this time full functionality came back and immediately Flight Reader began syncing about 18 flights - there were only 3 new ones but everything seemed to be ok when it was done which took an unusually long time.

Chris

8

@alanbach could you share your Error.log file?

9

@chrislaf version 1.8.1 includes fixes for the issues I found in the Error.log you shared.

10

Thanks, I have updated to the new version and all seems to be working fine.

Chris

11

Version 1.8.1 has same behavior as 1.7.54. I do not have an error log where you claim it should be.

Alan