Any instructions on how to enable enhanced transmission on Mavic 4 Pro would be appreciated.
Here is the Mavic 4 Pro User Manual. Read it twice, cover to cover. If you do not find what you are looking for here, then you have better hit YouTube hard and heavy...
I’m assuming you couldn’t find what you’re looking for in the manual. I entered
“how to enable enhanced transmission on Mavic 4 Pro”
into Google and got this
AI Overview
The DJI Mavic 4 Pro does not have a manual “enhanced transmission” setting to enable. Enhanced transmission on the Mavic 4 Pro is automatically enabled when the drone’s primary transmission system (OcuSync) encounters interference or limitations. In such cases, the drone will utilize the 4G network (via a DJI Cellular Dongle) to maintain a connection and data transmission.
But the Mavic 4 Pro is not yet a US imported drone and I thought that the Dongle was not all that compatible with the US based cellular systems...
My apologies. But, I’m not seeing the logic of this response or how it is otherwise relevant.
I was just guessing that you are in the US and if so, the Mavic 4 Pro, firmware may not work according to what one would expect if it was imported…
Next, the Dongles in general are notorious for only working with the 4g cellular systems in Asia…. You do know that not all cell phones work in all countries…
Specifically, the DJI Cellular Dongle 2 does not work in all countries. Its availability and functionality are limited to specific regions due to regulatory and network compatibility issues. For example, it’s not currently available in the United States. Additionally, even in countries where it is available, specific permissions and SIM cards might be required, as seen with the need for an Ofcom Licence and special SIM card in the UK
I was hoping someone was Knowledgeable on the subject. I am in Australia and the cellular dongle 2 works perfectly on my Air 3S, and it also worked for a brief time on my Mavic 4 pro using the air 3S controller. A firmware update has killed the functionality on the Mavic 4 pro but it still works fine on the air 3S. I have tried firmware rollbacks on both the drone and air 3s controller without success. I’ve done countless hours research and I even bought the cellular dongle 3 from china, which has a esimm and a patch simm, whatever that is, but no chance of inserting a simm from my local carrier so a waste of money at this stage. DJI will not help me unless I’m in china or one of the officially autorised countries, which Australia is not.